rubber metal bonding adhesive > water resistant rubber metal repair compound epoxy adhesive

water resistant rubber metal repair compound epoxy adhesive

BD804 oil water resistant rubber metal bonding repair compound epoxy adhesive

Product description of our BD804 metal rubber oil water resistant epoxy repair compound
bonding adhesives:
BD804 rubber-metal adhesive is the polyether adhesive,compared with chloroprene rubber adhesive,
it has the excellent water resistance,can be soaked in water for a long time after curing,specially used in
the bonding of rubber materials and metal materials,also suitable for the self-adhesion and each-adhesion between rubber,leather,conveyor belt, metal, ceramics and wood.

performance index of our BD804 rubber metal water oil resistant bonding repair adhesive
epoxy compound:

product name	physical state	standard packaging	operation time limit (25℃)	usable time (25℃)	range of application
BD804 rubber metal water resistant bonding epoxy adhesive	semi-fluid	400g	20min	6 hours	suitable for the self-adhesion and each-adhesion between rubber,leather, conveyor belt, metal, ceramics and wood, especially used in the bonding of rubber materials and metal materials.

color	density (g/cm3)	shear strength (Mpa) GB7124-2008	impact strength (J/cm2) GB6328-1999	peel strength (N/2.5cm) GB1041-1999	hardness (shore A) GB6329-86	working temperature （℃）
No color	1.02	60	284	96	78±5.	-60-100

How to use:
1.Matting on the surface of rubber,grind on the metal surface to reveal the fresh substrates,
and clean it by cleaning agent and degrease solvent.

2.After making main agent(A component) and curing agent(B component) mix uniformly according to ratio 3:1,
use hair brush or scraper to brush coating on the surface of metal and rubber separately for once,then make the rubber
be bonding on the metal surface. Curing for 24 hours at the normal temperature can reach to the largest strength.

Notes:
1.After the adhesive solution mixing,and stir it uniformly quickly,then smearing and bonding quickly,
every time the configured adhesive should be less as far as possible,it is advisable to less than 100g,
the usage period is about 15 minutes,if the usage period is too short,can properly reduce the amount of curing agent,
at least not less than 28% of A component.

2.Should pay attention to ventilation,fire prevention during storage and using.

Storage:
The product storage period at the temperature of 25 degree is 3 months,use it up as soon as possible after opening.
Surface crust is the normal phenomenon within storage period.The transparent liquid under the surface can be normal use.

Packaging specification:
400g/group: A component:300g, B component:100g,Or agreement large packaging,packed in a plastic jugs.

Product packaging photo of BD804 water oil resistant metal rubber bonding repair epoxy adhesives:

------分隔线----------------------------